DISEL LOCO – WDM 3A Locomotive

05-01-2021

WDM 3A Locomotive This is mixed service loco made for hauling more load. These are of two types one is rebuilt WDM2 and other is new one. New loco has 14000 series and rebuilt loco has 16, 17, 18 series. In WDM3A, 3 stands for 3000 and A for additional 100 HP hence the horse power engine is 3100 HP. It has fuel efficient kit & AC-DC transmission. Equipments of  Superstructure are similar to WDG3A loco and under truck are similar to WDM2 loco.   General Data   Engine Horse Power                                                     3100 HP   Loco Horse Power                                                       

Read More
WDG-3A – WDM3A लोकोमोटिव (WDM3A Locomotive )
January 4, 2021

WDM3A Locomotive  This is mixed service loco made for hauling more load. These are of two types one is rebuilt WDM2 and other is new one. New loco has 14000 series and rebuilt loco has 16, 17, 18 series. In WDM3A, 3 stands for 3000 and A for additional 100 HP hence the horse power engine is 3100 HP. It has fuel efficient kit & AC-DC

Read More
WDG-3A – मॉडिफिकेशन ( Modifications )
January 4, 2021

 Modifications  Digital Water Level Indicator  It is provided in loco pilot cab, its sensor is fitted in expansion tank no. 1, it shows water level in the tank. On this indicator colour indication lamp are provided 1. Green (full) 2. Yellow (half) (danger below 50 %) 3. Red (danger below 20%)  Auto manual switch and fuse is

Read More
WDG-3A – लोकोमोटिव का परीक्षण ( Checking Of Locomotive )
January 4, 2021

 Checking Of Locomotive  Checking of loco is essential for safe operation. It should be carried out with in specified condition and time. It is carried out united by Loco pilot and Assistant loco pilot in following ways - A) Examination Of Locomotive Before Leaving The Shed While Engine Is In Shut Down Condition - a) In Loco Pilot Cab

Read More
WDG-3A – रिपेयर बुक(Repair Book)
January 4, 2021

Read More
WDG-3A – ट्विन बीम हेडलाईट ( Twin Beam Head Light)
January 4, 2021

Twin Beam Head Light  On WDG3A loco two head lights are provided on each side of Loco viz. short hood and long hood. HLB (head light circuit breaker) is provided on front panel. Head light rotating switch is provided on both control stand having 6 positions. To glow head light following switches should be in on position 1. Battery knife

Read More
WDG-3A – लोको स्टेबल करना ( Procedure for Stabling Loco )
January 4, 2021

 Procedure for Stabling Loco  1. Loco to be stop after clearing fouling mark. 2. Apply loco brake by SA-9. 3. Apply hand brake. 4. Apply wooden wedges/Iron skids. 5. Shut down the engine properly and put off all circuit breakers and switches. 6. Remove A9, SA9 handle in application position and RH in neutral position. 7. Entries to

Read More

Latest News

14 Christmas/New Year Specials between Panvel and Madgaon