How are phase breaks (AC) or power gaps (DC) handled by the locomotives?

June 22, 2019, 1:19 PM
Share

The catenary has breaks or gaps in its electrical continuity every once in a while at points where successive sections are connected to different substations. A neutral section of catenary is usually provided between the two live sections of different phases or connected to different substations. At such points, single locomotives do not drop their pantographs, although on-board equipment such as the traction motors, compressors, blowers, etc. are switched off manually by the driver before the neutral section is entered. The main circuit breaker (DJ) is also opened. (Warning boards at 500m and 250m before the neutral section are provided for this purpose). (Earlier, locos used to routinely drop their pantographs for all neutral sections; this is no longer standard practice.)

Also Read – SURPRISING REASONS WHY SOME ARRANGED MARRIAGES DON’T WORK. 5 PEOPLE SHARE THEIR EXPERIENCE

In the case of multiple unit operation, however, pantographs are usually dropped on all the lashed-up locomotives, to avoid the possibility of short-circuiting adjacent sections of the catenary. (The possibility is remote, as normally there is no power flow between lashed-up units, hence the pantographs may not always be dropped, depending on the particular operational procedures of a division.)

Source – IFRCA.org

 

 

 

 
Railway Employee (App) Rail News Center ( App) Railway Question Bank ( App) Cover art  

Railway Mutual Transfer

(App)
Information Center  ( App)
 
Disclaimer: The Information /News /Video provided in this Platform has been collected from different sources. We Believe that “Knowledge Is Power” and our aim is to create general awareness among people and make them powerful through easily accessible Information. NOTE: We do not take any responsibility of authenticity of Information/News/Videos.
Share

This entry was posted in 2 Railway Employee, STUDY NEW, Railway Employee