AC Simulator – TRAIN HANDLING IN HUMP (KNOLL) & CRESTING GRADIENT (हम्प (नॉल) और शिखर वाले ग्रेडीयेंट पर गाड़ी का संचालन )

Latest News

रेल मंत्री, अश्विनी वैष्णव, ट्रेन संचालन में सुरक्षा बढ़ाने और दुर्घटनाओं को कम करने के लिए किए गए उपाय

View All >>

1 Rail News

view all>>

2 Railway Employee

Measures Taken By Govt To Enhance Safety In Train Operations And Minimize Train Accidents

view all>>

3 Always Important

जानिए पटरियों के साइड में क्यों लिखे होते हैं नंबर?

view all>>

AC Simulator – TRAIN HANDLING IN HUMP (KNOLL) & CRESTING GRADIENT (हम्प (नॉल) और शिखर वाले ग्रेडीयेंट पर गाड़ी का संचालन )

January 6, 2021, 6:48 PM

TRAIN HANDLING IN HUMP (KNOLL) & CRESTING GRADIENT

Starting of train on a hump or cresting grade There are no special requirements for starting on a hump or cresting grade. The starting procedure are the same as for starting the train on an ascending (up) grade. Zonal Railway Training Institute, Central Railway, Bhusawal ©AC Loco Simulator.

Negotiating Hump(knoll) gradient

i) Approach the hump with reduced power thus providing margin for power increase and for stretching the train as the locomotive starts up the hump. Increase power, if possible, to avoid bunching the slack at the leading end and maintain this stretch condition until the locomotive reaches the crest of the hump.

ii) As the locomotive passes the hump, and starts to pickup the speed the drawgear will tend to stretch out. To keep slack action to a minimum, reduce power to keep speed constant.

iii) Keep the slack action to a minimum by MP manipulation to suit loading on the train and the grade condition.

Negotiating crest grade

i) Changing of slack condition – the train slack is required to change from a stretch condition while ascending or approaching the crest to a bunch condition on the descending portion.

ii) Road knowledge – The Loco Pilot must be aware of the characteristics of terrain for adequate braking on the descending grade following the summit. Zonal Railway Training Institute, Central Railway, Bhusawal ©AC Loco Simulator.

iii) Maintain constant speed – as locomotive reaches the crest of grade, the Loco Pilot should attempt to maintain speed by reducing MP to relieve stress on couplers at the crest.

iv) Use of dynamic brake after a crest – A following down grade is long steep, the dynamic brake should be engaged after one half of the train has crested over the summit, the dynamic brakes should be engaged and carefully adjusted to control speed & gradually bunched the train.

v) Balancing a cresting grade – If the grade following the summit is a light descending grade, MP manipulation & dynamic brake may be used to control speed and train slack movement. If dynamic brake is not available, the train brake should be used in the same manner as for the descent of a light descending grade.

Stopping of train on a crest grade

i) Avoid drawgear stresses :- Take all efforts to avoid stopping of train on a cresting grade, for which the Loco Pilot must have a good knowledge of the location of all cresting grade. A stop of a train on a cresting grade can Zonal Railway Training Institute, Central Railway, Bhusawal ©AC Loco Simulator. 80 lead to excessive drawgear stress on the wagon at the crest while attempting to restart the train.

ii) Reducing drawgear stresses:- If a stop has to accomplish, do so in accordance with the stopping procedures for descending grades. When stopping on a cresting grade, always ensure that the brake application used to stop the train is the lightest possible thereby reducing drawgear forces particularly on the apex of the crest.

Stopping on a hump or knoll grade

Avoid Run-ins: -While stopping the train on a hump, extreme care must be taken that the brake application does not result in severe run-in. To avoid slack bunching on the hump or knoll, the train should be stopped in a stretched condition.

Railway Employee (App)

Rail News Center ( App)

Railway Question Bank ( App)

Railway Mutual Transfer

(App)

Information Center ( App)

Disclaimer: The Information /News /Video provided in this Platform has been collected from different sources. We Believe that “Knowledge Is Power” and our aim is to create general awareness among people and make them powerful through easily accessible Information. NOTE: We do not take any responsibility of authenticity of Information/News/Videos.

This entry was posted in 2 Railway Employee, 7 Study Material & Guide, AC Simulator, Locomotive, Railway Employee