First Aid – जलना और झुलसना

07-01-2021

राष्ट्रीय संरक्षा परिषद की खोज के अनुशार भारतवर्ष में हर वर्ष हजारो की संख्या में असावधानी और लापरवाही से अग्नि दुर्घटनाओ से कितनी ही जाने चली जाती है जो की थोड़ी सी सावधानी से  बचायी जा सकती है । इसमें 3% घरो में होती है और उनमे छोटे बच्चे और बूढ़े अधिक है अग्नि

Read More
ACT (RS) ABB Loco (English) (41. DO’S AND DON’TS )
January 10, 2021

DO’s and Don’ts for Loco Pilots DO’s  1) Acknowledge VCD always within every 60 sec. 2) Do maximum use of regenerative braking, it not only control the train but participate in generating the power. 3) In case of any trouble, as a last step, switch off the CE for 5 min. 4) In panto down condition and in CE off condition, to

Read More
ACT (RS) ABB Loco (English) (39. FLASHER LIGHT)
January 10, 2021

Flasher light  1. Automatic flasher light system is provided 2. One additional flasher light unit is provided in cab at Asstt side, ensure that switch provided on it is at ON 3. To switch on the flasher rotate the switch provided on panel –C 4. Note that flasher glows only when CE is ON or in cooling mode. 5. If on line CE gets

Read More
ACT (RS) ABB Loco (English) (38. RESETTING OF MCB)
January 10, 2021

Resetting of MCB Sometimes MCB trips momentarily without any equipment failure. Drivers should try to reset MCB once. While  resetting ABB make MCB, resetting screw below the respective circuit breaker turns to horizontal position from initial vertical position. This screw should be turned to vertical position first and then, MCB should  be

Read More
ACT (RS) ABB Loco (English) ((37. ACTIVE FUNCTIONS WITH DEACTIVATED DRIVER’S CAB)
January 10, 2021

Active functions with deactivated driver’s cab  While the cab deactivated , the following functions remain operative. 1. MEMOTEL functions 2. Catenary voltage display 3. Emergency brake cock on assistant driver’s side 4. Cab and desk lighting 5. Windshield wipers 6. Fault display screen 7. Marker lights switches 8. Cab venting

Read More
ACT (RS) ABB Loco (English) (36. CONTROL ELECTRONICS)
January 10, 2021

Control Electronics All functions of the locomotive are controlled by the control electronics. It takes the form of bus stations with processors. The bus stations communicate with each other via fiber optic Cables which are resistant to the effects of Electro Magnetic Interference The diagnostic equipment comprises a diagnosis computer with

Read More
ACT (RS) ABB Loco (English) (35. SANDING)
January 10, 2021

Sanding Sanding is done automatically on leading wheels when 1. Pressing ‘foot switch’ of sander. 2. Anti spin device activated. Note :-Don’t press PSA continuously, but press and release it. Continuous sanding is not possible, If PSA pressed continuous for 1 minute, then dead mans penalty brakes will apply. 10-12 sec pause is

Read More

General - Public

Raipid Rail क्या है? कैसे बदलेगा शहरों का भविष्य | Delhi-Meerut RRTS पूरी जानकारी

view all>>

Latest News

Raipid Rail क्या है? कैसे बदलेगा शहरों का भविष्य | Delhi-Meerut RRTS पूरी जानकारी

1 Rail News

Raipid Rail क्या है? कैसे बदलेगा शहरों का भविष्य | Delhi-Meerut RRTS पूरी जानकारी

view all>>